Scaling Hammers and Floor Scrapers

 

N-3R Lever Scaling Hammer

N-3R Scaling Hammer pic

The world standard N-3 scaling hammer for industry. (Shown with standard lever throttle.) (chisels sold separately)

Scaling Hammers group pic

N-3R Scaling Hammer Features:

The World standard in lever throttled industrial pneumatic scaling hammers. Ideal for general chipping, casting and billet cleaning, weld flux, caulking, paint removal, rust removal and the scrape-cleaning of castings.

  • Henrytools scalers provide an effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise difficult to prepare.

  • Minimum Parts, Maximum Performance.

  • All moving parts are steel, for longer tool life and low maintenance.
    Scaling hammers are offered in both regular and heavy-duty versions for fracturing thick and hard-to-remove materials.

  • Ruggedly designed powerful scaling hammers.

 

Accepts the industry standard 1/2" (12mm) square shank chisels.

scaler shank pic

Converts to needle scaler in seconds.

 

Lever Type Scaling Hammers Series
Model Throttle Type Scaler Type Blows Per Minute Bore and Stroke Weight Length Shank Type Inlet Size Hose Size Working Air Consumption
N-3R Lever Type Scaler 4650 1 Inch x 1.13 Inches
(25.4 mm x 29.0 mm)
4.1 Lb.
(1.9 Kg)
9.39 Inch
238.5 mm
1/2" Sq. 3/8" 3/8" (10 mm) 20 cfm (9.4 L/s) Max

 

"N" Series Scaling Hammer Chisels Chart
Part Number Description View Overall Length Shank Type 1/2" Square
839050 C-200-7 Angle Chisel angle chisel pic 7 1/4"

1/2" Square Shank Chisels

scaler shank pic

839051 D-200-7 1/2 Narrow Chisel angle chisel pic 7 1/2"
839299 C-200-12 Angle Chisel angle chisel pic 12"
839334 C-200-18 Angle Chisel angle chisel pic 18"
839335 D-200-18 Narrow Chisel angle chisel pic 18"
839341 D-200-12 Narrow Chisel angle chisel pic 12"
839467 B-200-7 Wide Chisel wide chisel pic 7"
839469 B-200-12 Wide Chisel wide chisel pic 12"
839470 2" Wide Scraper scraper chisel pic 7 1/2"
839471 3" Wide Scraper scraper chisel pic 7 1/2"

 

 

N-1R Push Type Throttle Scaling Hammer

N-1R Push Type Scaling Hammer pic

Model N-1R scaler with "Push" type throttle.

N3R Scaling Hammer action pic

N-1R Push Type Throttle Scaler Features:

Featuring a Push-Type throttle.

Accepts industry standard 1/2" (12mm) square shank chisels.

Ideal for general chipping, casting and billet cleaning, weld flux, caulking, paint removal, rust removal and the scrape-cleaning of castings.

Henrytools scalers provide an effective method of removing coatings, corrosion and other accumulated materials. These scalers will work on almost any surface, especially irregular surfaces that are otherwise difficult to prepare.

Converts to needle scaler in seconds.

Standard Chisels:

1/2" Square Shank scaler shank pic

N-1R Push_Type Scaler Specifications.
Model Throttle Type Scaler Type Blows Per Minute Bore and Stroke Weight Length Shank Type Inlet Size Hose Size Working Air Consumption
N-1R Push type Throttle Scaler 4650 1 Inch x 1.13 Inches
(25.4 mm x 29.0 mm)
4.0 Lb.
(1.8 Kg)
10.10 Inch
256.5 mm
1/2" Sq. 1/4" 3/8" (10 mm) 20 cfm (9.4 L/s) Max

 

"N" Series Scaling Hammer Chisels Chart
Part Number Description View Overall Length Shank Type 1/2" Square
839050 C-200-7 Angle Chisel angle chisel pic 7 1/4"

1/2" Square Shank Chisels

scaler shank pic

839051 D-200-7 1/2 Narrow Chisel angle chisel pic 7 1/2"
839299 C-200-12 Angle Chisel angle chisel pic 12"
839334 C-200-18 Angle Chisel angle chisel pic 18"
839335 D-200-18 Narrow Chisel angle chisel pic 18"
839341 D-200-12 Narrow Chisel angle chisel pic 12"
839467 B-200-7 Wide Chisel wide chisel pic 7"
839469 B-200-12 Wide Chisel wide chisel pic 12"
839470 2" Wide Scraper scraper chisel pic 7 1/2"
839471 3" Wide Scraper scraper chisel pic 7 1/2"

 

 

Model N-3RP Pistol Throttle Scaler

N3RP Pistol Scaling hammer pic

Model N3RP Pistol Grip throttle type scaling hammer.

 

 

N-3RP Pistol Scaler Features:

Ideal for general chipping, casting and billet cleaning, weld flux, caulking, paint removal, rust removal and mortar chipping.

Accepts industry standard 1/2" (12mm) square shank chisels.

Chisel Type:

1/2" Square Shank chisels are standard

scaler shank pic

 

Pistol Type Scaling Hammer
Model Throttle Type Scaler Type Blows Per Minute Bore and Stroke Weight Length Shank Type Inlet Size Hose Size Working Air Consumption
N-3RP Pistol Scaler 4650 1 Inch x 1.13 Inches
(25.4 mm x 29.0 mm)
4.2 Lb.
1.9 Kg)
10.05 Inch
255.3 mm
1/2" Sq. 3/8" 3/8" (10 mm) 20 cfm (9.4 L/s) Max

 

"N" Series Scaling Hammer Chisels Chart
Part Number Description View Overall Length Shank Type 1/2" Square
839050 C-200-7 Angle Chisel angle chisel pic 7 1/4"

1/2" Square Shankscaler shank pic

 

 

Chisels pic

839051 D-200-7 1/2 Narrow Chisel angle chisel pic 7 1/2"
839299 C-200-12 Angle Chisel angle chisel pic 12"
839334 C-200-18 Angle Chisel angle chisel pic 18"
839335 D-200-18 Narrow Chisel angle chisel pic 18"
839341 D-200-12 Narrow Chisel angle chisel pic 12"
839467 B-200-7 Wide Chisel wide chisel pic 7"
839469 B-200-12 Wide Chisel wide chisel pic 12"
839470 2" Wide Scraper scraper chisel pic 7 1/2"
839471 3" Wide Scraper scraper chisel pic 7 1/2"

 

 

 

Needle Type Scaling Hammers

N2R Needle Scaling hammer pic

Model N-2R needle scaler with standard lever throttle.

N-4R Push Needle Scaler pic

Model N-4R needle scaler features a Push-Type Throttle.

N-3RP Pistol Needle Scaling hammer pic

Model N-3RP Needle scaler with a Pistol type handle.

Needle Scaler Series Features:

  • The world standard in needle scaling hammers.
  • Quick release needle attachment converts needle scaler to a standard chisel scaler in seconds.
  • Accepts the industry standard 1/2" (12mm) square shank chisels.
  • The tool nose that holds the chisel can be replaced when worn out.
  • Front exhaust keeps work area clean.
  • Three-position "J" slot on needle scalers allow compensation for needle wear.

Chisel Type:

1/2" Square Shank chisels are standard.

scaler shank pic

 

 

Lever Type Needle Scaling Hammer Specifications
Model Throttle Type Scaler Type Blows Per Minute Bore and Stroke Weight Length Shank Type Inlet Size Hose Size Working Air Consumption
N-2R Lever Type Needle Scaler 4650 1 Inch x 1.13 Inches
(25.4 mm x 29.0 mm)
6.1 Lb.
(2.7 Kg)
15.35 Inch
(389.9 mm)
1/2" Sq. 3/8" 3/8" (10 mm) 20 cfm (9.4 L/s) Max
N-4R Push type Throttle Needle Scaler 4650 1 Inch x 1.13 Inches
(25.4 mm x 29.0 mm)
5.9 Lb.
(2.6 Kg)
16.07 Inch
(408.2 mm)
1/2" Sq. 1/4" 3/8" (10 mm) 20 cfm (9.4 L/s) Max
N-3RP Pistol Throttle Type Needle Scaler 4650 1 Inch x 1.13 Inches
(25.4 mm x 29.0 mm)
6.1 Lb.
(2.7 Kg)
15.35 Inch
(389.9 mm)
1/2" Sq. 3/8" 3/8" (10 mm) 20 cfm (9.4 L/s) Max

 

"N" Series Scaling Hammer Chisels Chart
Part Number Description View Overall Length Shank Type 1/2" Square
839050 C-200-7 Angle Chisel angle chisel pic 7 1/4"

scaler shank pic

1/2" Square Shank

839051 D-200-7 1/2 Narrow Chisel angle chisel pic 7 1/2"
839299 C-200-12 Angle Chisel angle chisel pic 12"
839334 C-200-18 Angle Chisel angle chisel pic 18"
839335 D-200-18 Narrow Chisel angle chisel pic 18"
839341 D-200-12 Narrow Chisel angle chisel pic 12"
839467 B-200-7 Wide Chisel wide chisel pic 7"
839469 B-200-12 Wide Chisel wide chisel pic 12"
839470 2" Wide Scraper scraper chisel pic 7 1/2"
839471 3" Wide Scraper scraper chisel pic 7 1/2"

 

 

Model N-10 Floor Scraper/Scaler

N-10 Floor Scaler pic

Model N-10 Floor scraper / scaling hammer shown above.

  • Floor Scraper.
  • The extended reach of this tool is intended for chipping in previously inaccessible areas.
  • Multiple applications include concrete reduction, removal of ceramic tiles, removal of thin set mortars, ice, crack chasing, chemical spills, metal slag and tank cleaning.
  • Design reduces the risk of back injury.
1/2" Square Shankscaler shank pic
Floor Length Scaling Hammer
Model Throttle Type Scaler Type Blows Per Minute Bore and Stroke Weight Length Shank Type Inlet Size Hose Size Working Air Consumption
N-10 Lever Floor Scraper 4650 1 Inch x 1.13 Inches
(25.4 mm x 29.0 mm)
  30.68 Inch
779.3 mm
1/2" Sq. 1/2: 3/8" (10 mm) 20 cfm (9.4 L/s) Max

 

"N" Series Scaling Hammer Chisels Chart
Part Number Description View Overall Length Shank Type 1/2" Square
839050 C-200-7 Angle Chisel angle chisel pic 7 1/4"

scaler shank pic

1/2" Square Shank

839051 D-200-7 1/2 Narrow Chisel angle chisel pic 7 1/2"
839299 C-200-12 Angle Chisel angle chisel pic 12"
839334 C-200-18 Angle Chisel angle chisel pic 18"
839335 D-200-18 Narrow Chisel angle chisel pic 18"
839341 D-200-12 Narrow Chisel angle chisel pic 12"
839467 B-200-7 Wide Chisel wide chisel pic 7"
839469 B-200-12 Wide Chisel wide chisel pic 12"
839470 2" Wide Scraper scraper chisel pic 7 1/2"
839471 3" Wide Scraper scraper chisel pic 7 1/2"

 

 

 

 

©2015 Henrytools, Inc. • 498 So. Belvoir Blvd., South Euclid, Ohio 44121
Henrytools - Phone: (216) 291-1011 •FAX: (216) 291-5949
Toll Free - Phone: (800) 826-5257 • FAX: (800) 303-2800

Email: daviidh@msn.com