Right Angle Air Grinders and Sanders

 

12RA Series Right Angle Air Grinders (0.3 H.P.)

12RA Angle Grinder with Disc pic

Model 12RA Angle Air Grinder shown with standard lever throttle.

12RA Angle Grinder pic

Model 12RAK Angle Air Grinder featuring a safety lockout lever throttle.

12RA Angle Grinder features:

  • Small compact tool design reaches remote areas.
  • Front exhaust.
  • Heavy-duty 3 piece collet is available with 1/4" or 1/8" insert.
  • Spiral-bevel gears provide smooth operation and long life.
  • Lightweight aluminum housing.
  • Choice of lever or lockout lever throttle.
  • Small Right Angle Head for Limited Space Sanding and Grinding.

Applications:

Weld preparation and smoothing; rust removal; deburring and blending of steel, cast iron, and aluminum. The model 12RA Right angle air grinder has a smaller more compact design for light grinding applications.

Standard Equipment: Choice of (1) 1/4" or 1/8" collet insert, wrenches, screen bushing.

Ships with the following:
Airtool & Operating Instructions and Service Manual
2 Wrenches (sizes based on options)

Capacity:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 19 cfm
Inlet size: 1/4"
Hose Size Recommended: 1/4"

 

12RA Angle Grinder action pic

Model 12RA Series (0.3 H.P.) Specifications
Model Throttle Type Exhaust Direction Speed Collet Size Angle Head Height Length Case Diameter Weight Rated Power
12RA Standard Lever Front 18,000 or
20,000
R.P.M.
1/4" or 1/8" collet insert (1/4" is standard) 2.953"
75mm
5.600"
143mm
1.500"
38.1mm
.94 lbs
.42kg
0.3 H.P.
12RAK Safety Lockout Lever Front 18,000 or
20,000
R.P.M.
1/4" or 1/8" collet insert (1/4" is standard) 2.953"
75mm
5.600"
143mm
1.500"
38.1mm
.94 lbs
.42kg
0.3 H.P.

 

Standard Equipment
Airtool & Operating Instructions and Service Manual
2 Wrenches (sizes based on options)

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 19 cfm
Inlet size: 1/4"
Hose Size Recommended: 1/4"

 

4401RA Series Right Angle Air Grinder and Sander (0.9 H.P.)

4401RASK angle grinder with guard pic

Model 4401RASK Angle Air Grinder with safety lockout lever and 4" guard.. Featuring a one piece case. (11000RPM Standard speed).

4401RAS Angle Grinder pic

Model 4401RACSK steel cased angle grinder shown with 1/4"collet and carbide burr installed. (11000RPM Standard speed). (with Safety lockout lever throttle.)

4401RASC Angle Grinder pic

Model 4401RACSK steel cased angle grinder shown with 1/4"collet and carbide burr installed. (11000RPM Standard speed). (with Safety lockout lever throttle.)(sample)

4401RA Angle Air Grinder features:

  • The Henrytools 4401RA Series angle air grinders feature a one piece case design for a more comfortable grip.
  • Geared to run at (9000 to 11000 R.P.M.) (11000RPM is standard).
  • Taller gears provide more power at a lower RPM.
  • An industrial right angle grinder ready to tackle your toughest grinding surface preparation needs.
  • Tool is available with either a 3/8-24 thd spindle or 5/8-11. See the chart below for the model you'd like to order.
    The 4401RA series grinders are up to the task.
  • A stainless steel right-angle head that resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long tool life.
  • Removable side dead handle.
  • Aluminum or Steel case.
  • Adjustable exhaust direction side exhaust.
  • Choice of lever or lockout lever throttle.)
  • Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4" or 5" Guard.
  • Applications: cutting, weld preparation and smoothing; rust removal; deburring and blending of steel, cast iron, and aluminum.

 

Capacity:


Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S)

4401RACS in Action pic

 

4401RA Right Angle Air Grinders (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter Inlet Size
4401RA Lever Alum Side 9000
to 11000
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
3/8-24 x 0.58 Inch (15mm) 7.4_Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
4401RAZ Lever Alum Side 9000
to 11000
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
5/8-11 x 0.98 Inch (25mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
4401RAC Lever Alum Side 9000
to 11000
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
1/4 Inch Built-In Collet 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
4401RASK Safety Lockout Lever Steel Side 9000
to 11000
R.P.M.
0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
3/8-24 x 0.58 Inch (15mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"

 

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.
GUARDS:

4503 3” TYPE 27 GUARD
4504 4” TYPE 27 GUARD
4505 5” TYPE 27 GUARD
4506 6” Type 27 GUARD
SPIRAL COOL PADS:

889271 5/8-11 4” SANDING PAD (MAX 12000 RPM)
889271-A 3/8-24 4” SANDING PAD (MAX 12000 RPM)
849848 5/8-11 5” SANDING PAD (MAX 10000 RPM)
849848-A 3/8-24 5” SANDING PAD (MAX 10000 RPM

Please view the Henrytools Parts Print for your particular model for various mounting accessories to equip your tool for complete safety and convenience.

 

4402RA Series Right Angle Air Grinder and Sander (0.9 H.P.)

4402RASK angle grinder with guard pic

Model 4402RASK Angle Air Grinder with safety lockout lever and 4" guard.. Featuring a "one-piece case" design. (13500 RPM Standard speed). (sample)

4401RASC Angle Grinder pic

Model 4402RACSK steel cased angle grinder shown with 1/4"collet and carbide burr installed. (13500 RPM Standard speed). (with Safety lockout lever throttle.) (Side Handle removed for clarity.)

4402RA Series Angle Air Grinder features:

  • The Henrytools 4402RA Series angle air grinders feature a one piece case design for a more comfortable grip.
  • Geared to run at (13500RPM) standard.
  • Taller gears provide more power at a lower RPM.
  • An industrial right angle grinder ready to tackle your toughest grinding surface preparation needs.
  • Tool is available with either a 3/8-24 thd spindle or 5/8-11. See the chart below for the model you'd like to order.
  • The 4402RA series grinders are up to the task.
  • A stainless steel right-angle head that resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long tool life.
  • Removable side dead handle.
  • Aluminum or Steel case (Specify when ordering).
  • Adjustable exhaust direction side exhaust.
  • Choice of lever or lockout lever throttle.)
  • Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4" or 5" Guard.

Applications: cutting, weld preparation and smoothing; rust removal; deburring and blending of steel, cast iron, and aluminum.

Capacity:


Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S)

4401RACS in Action pic

4402RA Right Angle Air Grinders (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter Inlet Size
4402RA Lever Alum Side 13500
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
3/8-24 x 0.58 Inch (15mm) 7.4_Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
4402RAZ Lever Alum Side 13500
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
5/8-11 x 0.98 Inch (25mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
4402RAC Lever Alum Side 13500
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
1/4 Inch Built-In Collet 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
4402RASK Safety Lockout Lever Steel Side 13500
R.P.M.
0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
3/8-24 x 0.58 Inch (15mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"

 

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.
GUARDS:

4503 3” TYPE 27 GUARD
4504 4” TYPE 27 GUARD
4505 5” TYPE 27 GUARD
4506 6” Type 27 GUARD
SPIRAL COOL PADS:

889271 5/8-11 4” SANDING PAD (MAX 12000 RPM)
889271-A 3/8-24 4” SANDING PAD (MAX 12000 RPM)
849848 5/8-11 5” SANDING PAD (MAX 10000 RPM)
849848-A 3/8-24 5” SANDING PAD (MAX 10000 RPM

Please view the Henrytools Parts Print for your particular model for various mounting accessories to equip your tool for complete safety and convenience.

 

44RA Series Right Angle Grinders (0.9 H.P.)

44RA Angle Grinder with wheel pic

Model 44RA right angle grinder shown with 4" guard and standard lever throttle. (Aluminum case shown.)

44RAZK Angle Grinder with grinding wheel pic

Model 44RAZK right angle grinder shown with 5" guard and Safety lockout throttle lever. (Aluminum case shown.) See chart for spindle sizes.

44RACK angle Grinder with burr pic

Model 44RACK Angle Grinder with collet for use with carbide burrs and mounted points. (shown with safety lockout lever throttle).

44RA Series Right Angle Air Grinder Features:

  • Henrytools traditional 44RA series grinder with a "THICK" two-piece case design for tool operators with larger hands.
  • Two piece design also provides a platform for easier tool maintenance.
  • Geared to run at 11000RPM standard.
  • Taller gears provide more power at a lower RPM.
  • An industrial right angle grinder grinder ready to tackle your toughest grinding surface preparation needs.
  • Features a stainless steel right-angle head that resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long tool life.
  • Removable side dead handle.
  • Aluminum or Steel case.
  • Adjustable exhaust direction side exhaust.
  • Choice of lever or safety lockout lever throttle to avoid accidental startups.)
  • Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4", 5" or 6" Wheel Guard.

 

Air Requirement:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S)

44RA Series Right Angle Grinders (0.9 H.P.) Traditional Style
Model Throttle Lever Type Case Material Exhaust Direction Rated Power Weight Spindle Type Length Housing Diameter Working Air Consumption Inlet Size
44RA Lever Alum Side 0.9 H.P.
(675 W)
2 1/2 lbs
1.1 kg
3/8-24 x 0.58 Inch (15mm) 8 5/16"
211mm
1.8 Inch
(46 mm)
25 CFM
(11.8 L/S)
3/8"
44RAS Lever Steel Side 0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
3/8-24 x 0.58 Inch (15mm) 8 5/16"
211mm
1.8 Inch
(46 mm)
25 CFM
(11.8 L/S)
3/8"
44RAC Lever Alum Side 0.9 H.P.
(675 W)
2 1/2 lbs
1.1 kg
1/4 Inch Built-In Collet 8 5/16"
211mm
1.8 Inch
(46 mm)
25 CFM
(11.8 L/S)
3/8"
44RAZ Lever Alum Side 0.9 H.P.
(675 W)
2 1/2 lbs
1.1 kg
5/8-11 x 0.98 Inch (25mm) 8 5/16"
211mm
1.8 Inch
(46 mm)
25 CFM
(11.8 L/S)
3/8"

 

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.
GUARDS:

4503 3” TYPE 27 GUARD
4504 4” TYPE 27 GUARD
4505 5” TYPE 27 GUARD
4506 6” Type 27 GUARD
SPIRAL COOL PADS:

889271 5/8-11 4” SANDING PAD (MAX 12000 RPM)
889271-A 3/8-24 4” SANDING PAD (MAX 12000 RPM)
849848 5/8-11 5” SANDING PAD (MAX 10000 RPM)
849848-A 3/8-24 5” SANDING PAD (MAX 10000 RPM

Please view the Henrytools Parts Print for your particular model for various mounting accessories to equip your tool for complete safety and convenience.

 

44ARA Series Right Angle Grinder and Sander (0.9 H.P.)

44ARA Angle grinder pic

Model 44ARA a lightweight "one piece" aluminum case angle grinder with 4"Guard (11000RPM Standard speed). (sample)

4401RASC Angle Grinder pic

Model 44ARACSK steel one piece cased angle grinder shown with 1/4"collet and carbide burr installed. (11000RPM Standard speed). (with Safety lockout lever throttle.)(sample)

 

44RARA Series Right Angle Air Grinder Features:

  • The Henrytools 44ARA Series angle grinders feature a narrower 'one piece" case design for a more comfortable grip. for smaller hands.
  • Geared to run at (9000 to 11000 R.P.M.) (11000RPM is standard).
  • Taller gears provide more power at a lower RPM.
  • An industrial right angle grinder ready to tackle your toughest grinding surface preparation needs.
  • Tool is available with either a 3/8-24 thd spindle or 5/8-11. See the chart below for the model you'd like to order.
  • A stainless steel right-angle head that resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long tool life.
  • Removable side dead handle.
  • Aluminum or steel case.
  • Adjustable exhaust direction side exhaust.
  • Choice of lever or lockout lever throttle.)
  • Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4" or 5" Guard.

 

Air Requirement:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S).

44ARAC Angle grinder with collet pic


44ARA Right Angle Grinders (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter Inlet Size
44ARA Lever Alum Side 9000
to 11000
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
3/8-24 x 0.58 Inch (15mm) 7.4_Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
44ARAZ Lever Alum Side 9000
to 11000
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
5/8-11 x 0.98 Inch (25mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
44ARAC Lever Alum Side 9000
to 11000
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
1/4 Inch Built-In Collet 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
44ARASK Safety Lockout Lever Steel Side 9000
to 11000
R.P.M.
0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
3/8-24 x 0.58 Inch (15mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"

 

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.
GUARDS:

4503 3” TYPE 27 GUARD
4504 4” TYPE 27 GUARD
4505 5” TYPE 27 GUARD
4506 6” Type 27 GUARD
SPIRAL COOL PADS:

889271 5/8-11 4” SANDING PAD (MAX 12000 RPM)
889271-A 3/8-24 4” SANDING PAD (MAX 12000 RPM)
849848 5/8-11 5” SANDING PAD (MAX 10000 RPM)
849848-A 3/8-24 5” SANDING PAD (MAX 10000 RPM

Please view the Henrytools Parts Print for your particular model for various mounting accessories to equip your tool for complete safety and convenience.

 

4405RA Series Right angle Grinders/ Sander (0.9 H.P)

4405RASZ Angle Grinder/Sander pic

Model 4405RAZS with Steel case shown with 5/8-11 spindle for use with spiral cool pads. (shown with lockout safety lever)

Choice of Aluminum or Steel Case. Specify when ordering.

 

4405RA Series Right Angle Air Grinder/Sander features:

  • One piece case design for a more comfortable grip.
  • Geared to run at ( 9000-11000RPM) (11000RPM is standard). (Specify speed when ordering).
  • Taller gears provide more power at a lower RPM.
  • The 4405RA series sander/grinders are up to the task.
  • A stainless steel right-angle head that resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long tool life.
  • Offset side dead handle keeps hands a safe distance from the revolving sanding pad.
  • Aluminum or steel case.
  • Adjustable exhaust direction side exhaust.
  • Choice of standard lever or safety lockout lever throttle.
  • This model can easily be adapted to a standard right angle grinder with the purchase of a wheel guard and appropriate grinding wheel adaptors. (See model 44ARA series)

Air Requirement:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S).

Accessories: Your choice of one of the following.

SPIRAL COOL PADS:

889271 5/8-11 • 4" SANDING PAD (MAX 12000 RPM)

849848 5/8-11 • 5" SANDING PAD (MAX 10000 RPM)

4405RA Series Right Angle Sander/Grinder (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Rated Power Weight Spindle Type Length Housing Diameter Inlet Size
4405RAZ Standard Lever Alum Side 0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
5/8-11 x 0.98 Inch (25mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
4405RAZSK Safety Lockout Lever Steel Side 0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
5/8-11 x 0.98 Inch (25mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"

 

Tool comes with choice of any of the following:

SPIRAL COOL PADS:

889271 5/8-11 4� SANDING PAD (MAX 12000 RPM)

849848 5/8-11 5� SANDING PAD (MAX 10000 RPM)

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket (if not already equipped), safety lockout lever throttle.

 

45RA Series Right Angle Grinders Traditional Style (0.9 H.P.)

45RAZK Angle Grinder with grinding wheel pic

Model 45-RAZ Aluminum case grinder shown with 5/8-11 threaded spindle and 5" guard. Tool runs at a standard speed of 13500 RPM.

45RA Angle Grinder with wheel pic

Model 45-RA Aluminum cased grinder show with 3/8-24 spindle and 4" guard. Tool runs a standard speed of 13500 RPM.

45RAC angle grinder with built in collet pic

Model 45-RAC Angle grinder with 1/4" Built-in collet spindle. For use with carbide burrs, mounted points, etc. Tool runs at a standard speed of 13500 RPM.

45RA Series Grinder features:

  • Henrytools traditional 45RA series grinder with a "THICK" two-piece case design for tool operators with larger hands.
  • Geared to run at (13500RPM-14000RPM) (13500 RPM is standard).
  • An industrial right angle grinder ready to tackle your toughest grinding surface preparation needs.
  • A stainless steel right-angle head that resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long tool life.
  • Removable side dead handle.
  • Aluminum or steel case.
  • Adjustable exhaust direction side exhaust.
  • Choice of lever or Safety lockout lever throttle.
  • Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4", 5" or 6" Wheel Guard.

Air Requirement:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S).

 

45RA Grinder in action pic

 

45RA Series Right Angle Grinders Traditional Style (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter Inlet Size
45RA Standard Lever Alum Side 13500
to 14000
R.P.M.
0.9 H.P.
(675 W)
2 1/2 lbs
1.1 kg
3/8-24 x 0.58 Inch (15mm) 8 5/16"
211mm
1.8 Inch
(46 mm)
3/8"
45RAS Standard Lever Steel Side 13500
to 14000
R.P.M.
0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
3/8-24 x 0.58 Inch (15mm) 8 5/16"
211mm
1.8 Inch
(46 mm)
3/8"
45RAZK Safety Lockout Lever Alum Side 13500
to 14000
R.P.M.
0.9 H.P.
(675 W)
2 1/2 lbs
1.1 kg
5/8-11 x 0.98 Inch (25mm) 8 5/16"
211mm
1.8 Inch
(46 mm)
3/8"
45RACK Safety Lockout Lever Alum Side 13500
to 14000
R.P.M.
0.9 H.P.
(675 W)
2 1/2 lbs
1.1 kg
1/4 Inch Built-In Collet 8 5/16"
211mm
1.8 Inch
(46 mm)
3/8"

 

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.
GUARDS:

4503 3” TYPE 27 GUARD
4504 4” TYPE 27 GUARD
4505 5” TYPE 27 GUARD
4506 6” Type 27 GUARD

 

45ARA Series Angle Grinders (13500RPM) (0.9 H.P.)

45RASK angle grinder with guard pic

Model 45ARA with steel case and a 4"Guard (13500RPM Standard speed). (sample) (See chart for spindle types)

45ARAC Angle Grinder pic44ARAC Angle grinder with collet pic

Model 45ARAC Angle Grinder with collet shaft (pictured with safety lockout lever throttle)(side handle removed for clarity)

45ARA Series Angle Grinder features:

  • Featuring a slim one piece case design for a more comfortable grip.
  • Geared to run at (13500RPM-14000RPM) (13500 RPM is standard).
  • An industrial right angle grinder grinder ready to tackle your toughest grinding surface preparation needs.
  • A stainless steel right-angle head that resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long tool life.
  • Removable side dead handle.
  • Aluminum or steel case.
  • Adjustable exhaust direction side exhaust.
  • Choice of lever or Safety lockout lever throttle.
  • Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4", 5" or 6" Wheel Guard.

Applications:

Applications: cutting, weld preparation and smoothing; rust removal; deburring and blending of steel, cast iron, and aluminum.

 

Air Requirement:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S)

45ARA Series Right Angle Grinders (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter Inlet Size
45ARA Lever Alum Side 13500
to 14000
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
3/8-24 x 0.58 Inch (15mm) 7.4_Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
45ARAZ Lever Alum Side 13500
to 14000
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
5/8-11 x 0.98 Inch (25mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
45ARAC Lever Alum Side 13500
to 14000
R.P.M.
0.9 H.P.
(675 W)
2.8 Lbs
(1.3 Kg)
1/4 Inch Built-In Collet 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"
45ARASK Safety Lockout Lever Steel Side 13500
to 14000
R.P.M.
0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
3/8-24 x 0.58 Inch (15mm) 7.4 Inches
(188 mm)
1.6 Inches
(41 mm)
3/8"

 

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.
GUARDS:

4503 3? TYPE 27 GUARD
4504 4? TYPE 27 GUARD
4505 5? TYPE 27 GUARD
4506 6? Type 27 GUARD

 

 

46RA Series Right Angle Grinders (0.9 H.P.)

46RASW Angle Grinder with guard pic

Model 46RASW Steel Right angle grinder shown. This tool has a special 3/8-24 x 0.58 Inch (This spindle is shorter and can only be used in special applications.) (Lightweight aluminum case is available.)

46RA angle grinder with guard pic

Model 46RASK steel case angle grinder with 4" guard and safety Lockout lever throttle. This tool is equipped with the world standard 3/8-24 x 0.98 Inch spindle so it can adapt to almost any situation. (most popular model) (Lightweight aluminum case is available.)

46RAC Angle grinder with rock pic

Model 46RACSK Angle grinder with a steel case. Features a 1/4" built-in collet shaft for use with carbide burrs, etc. (Lightweight aluminum case is available.)

46RA Angle Grinder series features:

  • Small head for the harder-to-reach applications.
  • No Side Handle exists to interfere with tight quarter grinding. Tool is nicely balanced for one-handed grinding operations.
  • The small stainless steel right angle head resists corrosion and abrasion.
  • Runs (13000-15000 RPM). (13500 RPM is standard).
  • Spiral-beveled gears provide smooth operation and long life.
  • Aluminum or rugged steel case.
  • Adjustable side exhaust.
  • Slip-fit motor design for simple maintenance.
  • Hardened steel motor parts.
  • Choice of lever or lockout lever throttle.
  • Ships Standard: with 4" Wheel Guard

Applications:

Applications: cutting, weld preparation and smoothing; rust removal; deburring and blending of steel, cast iron, and aluminum. The 46RA Series grinders can be used in smaller spaces where other angle grinders cannot reach.

Air Requirement:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S).

46RA Series Right Angle Grinders (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter
46RA Standard Lever Alum Side 13000
to 15000
R.P.M.
0.9 H.P.
(675 W)
2 lbs.
10 oz.
.9kg
3/8-24 x 0.98 Inch (25mm) 8 7/8"
225mm
1.6 Inches
(41 mm)
46RAS Standard Lever Steel Side 13000
to 15000
R.P.M.
0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
3/8-24 x 0.98 Inch (25mm) 8 7/8"
225mm
1.6 Inches
(41 mm)
46RASK Safety Lockout Lever Steel Side 13000
to 15000
R.P.M.
0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
3/8-24 x 0.98 Inch (25mm) 8 7/8"
225mm
1.6 Inches
(41 mm)
46RACSK Safety Lockout Lever Steel Side 13000
to 15000
R.P.M.
0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
1/4 Inch Built-In Collet 8 7/8"
225mm
1.6 Inches
(41 mm)
46RASW Standard Lever Steel Side 13000
to 15000
R.P.M.
0.9 H.P.
(675 W)
3.5 Lbs
(1.6 Kg)
3/8-24 x 0.58 Inch (15mm)(special spindle) 8 7/8"
225mm
1.6 Inches
(41 mm)

 

46RA Accessories
Part Number Description

540875

4" TYPE 27 GUARD
400-78 3/8-24 TO 5/8-11 ADAPTER
400-78-S 3/8-24 x 1/4 SET SCREW
405-24 BACKING PLATE FOR 490-KR
490-K 3/8-24 X .980 TYPE 27 ADAPT. ASSY.
490-KR 3/8-24 X .580 TYPE 27 ADAPT. ASSY.
490-1 BACKING PLATE FOR 490-K
490-2 NUT FOR 490-K & 490-KR

Please refer to 46RA parts manual for complete accessory listing.

 

 

48RA Series Right Angle Grinders (0.9 H.P.)

48RA Grinder pic

Model 48RA angle grinder with standard 3/8"-24 threaded spindle and 4" guard. (11000 RPM is standard)

48RAS Angle Grinder with 5" Guard pic

Model 48RASZ angle grinder shown with a 5/8"-11 spindle and 5" guard.

 

48RADS Angle Grinder pic

Model 48RASD Angle grinder features and Erickson style collet for use with carbide burrs, etc. (pictured with flap whee)l. (Side handle removed for clarity.)

48RA Series Angle Grinder features:

  • One piece case design for a more comfortable grip.
  • Geared to run at ( 9000-11000 RPM) (11000 RPM is standard). (Specify speed when ordering).
  • Taller gears provide more power at a lower RPM.
  • A stainless steel right-angle head that resists corrosion and is extra strong.
  • Extra heavy-duty angle head and spiral bevel gears for long life.
  • Removable side dead handle (Dead handle placement can be maneuvered to either side of the tool.).
  • Aluminum or steel case.
  • Adjustable side exhaust deflector for redirecting air away from the operator or work piece.
  • Choice of standard lever or safety lockout lever throttle.

Applications:

Applications: cutting, weld preparation and smoothing; rust removal; deburring and blending of steel, cast iron, and aluminum. The 46RA Series grinders can be used in smaller spaces where other angle grinders cannot reach.

Air Requirement:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S).

Model 48RAD equipped with collet spindle: capacity: 1/4 Inch Burrs/Mounted Points (standard) or(1/4", 1/8", 5/16",3/8" shafted mounted points or carbide burrs depending on thecollet insert size being used)

 

48RA angle grinder in action pic

48RA Series Right Angle Grinders (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter
48RA Standard Lever Alum Side 9000
to
11000
R.P.M.
0.9 H.P.
(675 W)
2.8 lb
(1.3 Kg)
3/8-24 x 0.98 Inch (25 mm) 9.2 Inches
(234 mm)
1.6 Inches
(41 mm)
48RAS Standard Lever Steel Side 9000
to
11000
R.P.M.
0.9 H.P.
(675 W)
3.5 lb
(1.6 Kg)
3/8-24 x 0.98 Inch (25 mm) 9.2 Inches
(234 mm)
1.6 Inches
(41 mm)
48RASZ Standard Lever Steel Side 9000
to
11000
R.P.M.
0.9 H.P.
(675 W)
3.5 lb
(1.6 Kg)
5/8-11 x 0.98 Inch (25 mm) 9.2 Inches
(234 mm)
1.6 Inches
(41 mm)
48RASD Standard Lever Steel Side 9000
to
11000
R.P.M.
0.9 H.P.
(675 W)
3.5 lb
(1.6 Kg)
Changeable Inserts
(2 piece)
Collet
9.2 Inches
(234 mm)
1.6 Inches
(41 mm)
48RASK Safety Lockout Lever Steel Side 9000
to
11000
R.P.M.
0.9 H.P.
(675 W)
3.5 lb
(1.6 Kg)
3/8-24 x 0.98 Inch (25 mm) 9.2 Inches
(234 mm)
1.6 Inches
(41 mm)

Model 48RAD equipped with collet spindle: capacity: 1/4 Inch Burrs/Mounted Points (standard) or(1/4", 1/8", 5/16",3/8" shafted mounted points or carbide burrs depending on collet insert size being used)

Standard Equipment
Airtool, Operating Instructions and Service Manual, 2 Wrenches (sizes based on options)


The depressed center wheel adapters are not supplied as standard equipment with these tools.
If you are using a wheel that requires the adapters, they must be purchased separately.

Please view the parts print for your tool for accessories or the Henrtyools catalog for more information.

 

44RAE Extended Length Right Angle Grinders (0.9 H.P.)

44RAE Extended Angle Grinder pic

Model 44RAEK Extended Length Right Angle Grinder pictured with 6" guard. (shown with safety lever lockout throttle). (11000 RPM standard speed) (Your choice of either a 4", 5" or 6" guard)

44RACE collet Angle Grinder pic

Model 44RAECK Extended Length Grinder with Collet spindle. (Shown with carbide burr installed) (11000 RPM is standard)

44RAE angle grider with 4" guard pic

Model 44RAE Extended Length Right Angle Grinder pictured with 4" guard. (11000 RPM standard speed)

44RAE Extended Length Angle Grinder features:

  • Henrytools popular 44RAE Extended Length series angle grinder.
  • Two piece case design provides a platform for easier tool maintenance.
  • Geared to run at 11000RPM standard.
  • Taller gears provide more power at a lower RPM.
  • An industrial right angle grinder grinder ready to tackle your toughest grinding surface preparation needs.
  • A stainless steel right-angle head that resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long tool life.
  • Removable side dead handle.
  • Aluminum case.
  • Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4", 5" or 6" Wheel Guard

 

Applications:

Cutting, weld preparation and smoothing; rust removal; deburring and blending of steel, cast iron, and aluminum.

Air Requirement:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S).

 

44RAE Extended Length angle grinder with 6" guard pic

44RAE Extended Length Right Angle Grinders (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter Inlet Size
44RAE Standard Lever Alum Side 9000-11000RPM 0.9 H.P.
(675 W)
2.75lbs.
1.2kg
3/8-24 x 0.58 Inch (15mm) 11.18 Inch
284mm
1.8 Inch
(46 mm)
3/8" N.P.T.
44RAEZ Standard Lever Alum Side 9000-11000RPM 0.9 H.P.
(675 W)
2.75lbs.
1.2kg
5/8-11 x 0.98 Inch (25mm) 11.18 Inch
284mm
1.8 Inch
(46 mm)
3/8" N.P.T.
44RAEC Standard Lever Alum Side 9000-11000RPM 0.9 H.P.
(675 W)
2.75lbs.
1.2kg
Built-In 1/4" collet 11.18 Inch
284mm
1.8 Inch
(46 mm)
3/8" N.P.T.

Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4" ,5" or 6" Wheel Guard

 

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.
GUARDS:

4503 3? TYPE 27 GUARD
4504 4? TYPE 27 GUARD
4505 5? TYPE 27 GUARD
4506 6? Type 27 GUARD

Please view the Henrytools Parts Print for your particular model for various mounting accessories to equip your tool for complete safety and convenience.

 

45RAE Extended Length Right Angle Grinder (0.9 H.P.)

45RAE angle grider with 4" guard pic

Model 45RAE Extended Length angle grinder with 4" guard. Tool runs at 13500 RPM standard.

45RAE Extended Angle Grinder pic

Model 45RAE Extended Length angle grinder with 6" guard and safety lockout lever throttle. Tool runs at 13500 RPM standard

45RACE Extended angle grinder with collet pic

Model 45RAECK Extended Length Grinder with Collet spindle. (Shown with carbide burr installed) (13500 RPM is standard)

 

45RAE Extended Lenth Right Angle Grinder features:

  • Henrytools popular 45RAE Extended Length series angle grinder.
  • Two piece case design provides a platform for easier tool maintenance.
  • Geared to run at 13500 RPM standard.
  • An industrial right angle grinder grinder ready to tackle your toughest grinding surface preparation needs.
  • A stainless steel right-angle head that resists corrosion and is extra strong.
  • Spiral-beveled gears provide smooth operation and long tool life.
  • Removable side dead handle.
  • Aluminum case.
  • Adjustable exhaust direction side exhaust.
  • Choice of lever or safety lockout lever throttle to avoid accidental startups.
  • (Other guard sizes are available at no extra cost.)
  • Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4" ,5" or 6" Wheel Guard

Applications:

Cutting, weld preparation and smoothing; rust removal; deburring and blending of steel, cast iron, and aluminum.

These angle grinders offer superior cutting, weld preparation and smoothing; rust removal; deburring and blending of steel, cast iron, and aluminum. The 45RAE Series grinder has a run speed of 13500RPM encouraging the use of standard speed abrasive wheels that are readily available.

 

Air Requirement:

Recommended working air pressure: 90 p.s.i.
Working Air Consumption: 25 CFM (11.8 L/S).

 

45RAE Extended Length Right Angle Grinders (0.9 H.P.)
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter Inlet Size
45RAE Standard Lever Alum Side 12000-14000RPM (13500RPM is Standard) 0.9 H.P.
(675 W)
2.75lbs.
1.2kg
3/8-24 x 0.58 Inch (15mm) 11.18 Inch
284mm
1.8 Inch
(46 mm)
3/8" N.P.T.
45RAEZ Standard Lever Alum Side 12000-14000RPM (13500RPM is Standard) 0.9 H.P.
(675 W)
2.75lbs.
1.2kg
5/8-11 x 0.98 Inch (25mm) 11.18 Inch
284mm
1.8 Inch
(46 mm)
3/8" N.P.T.
45RAEC Standard Lever Alum Side 12000-14000RPM (13500RPM is Standard) 0.9 H.P.
(675 W)
2.75lbs.
1.2kg
Built-In 1/4" collet 11.18 Inch
284mm
1.8 Inch
(46 mm)
3/8" N.P.T.

Important: (Specify guard size when ordering. ) You have a choice of either a 3", 4" ,5" or 6" Wheel Guard

 

 

Extra Cost Equipment: 3/8", 5/8", 7/8" I.D. depressed center wheel adaptor kits, offset side handle bracket, lockout lever throttle.
GUARDS:

4503 3? TYPE 27 GUARD
4504 4? TYPE 27 GUARD
4505 5? TYPE 27 GUARD
4506 6? Type 27 GUARD

Please view the Henrytools Parts Print for your particular model for various mounting accessories to equip your tool for complete safety and convenience.

 

52RA Series 2 HP Right Angle Grinder/ Sander

52RA Angle grinder head unit pic

Model 52RA Angle grinder head unit closeup.

52RA Angle Grinder reverse view pic

Model 52RA Angle Grinder reverse view.

52RA Angle Grinder with wheel pic

Model 52RA shown with a 7" guard for use with depressed center & Type 1 cut-off wheels. Tool is shown with a safety lock throttle to prevent accidental starts.

Model 52RA Angle Grinder features:

  • The Henrytools industrial powered 2 HP motor is ideal for medium-heavy duty applications.
  • Perfect for fast weld and stock removal, rust and scale removal, and heavy metal deburring.
  • The 52RA is a 2 HP right angle grinder designed for use with Depressed Center & Type 1 Grinding/Cut-off Wheels.
  • Powerful 2 hp air motor is governor-controlled to maintain RPM under a heavy load.
  • Accepts optional 7" diameter Type 27 Reinforced Depressed Center Wheels, with 7/8" center hole (wheel width of 1/8" to 1/4").
  • The 8,000 RPM air motor has super high-quality vanes for longer life.
  • Air passage continually cools gear box to reduce wear and heat buildup.
    Dual position dead/side handle increases safety and reduces hand fatigue.
  • Adjustable Guard Position
  • Air Inlet Size: 1/2" NPT
    Hose Size Recommendations: 1/2" (13 mm)

Applications:

Ideal for medium-heavy duty applications. Perfect for fast weld and stock removal, rust and scale removal, and heavy metal deburring.

 

Air Consumption:

40 cfm (18.9 L/s) Max

52RA Series 2 HP Right Angle Grinder/ Sander
Model Throttle Lever Type Case Material Exhaust Direction Speed Rated Power Weight Spindle Type Length Housing Diameter Inlet Size
52RA Standard Lever Alum Side

4000-
8000
R.P.M.

(8000RPM is standard)

2.0 H.P
1500 W
8.0 Lb/
.3.6 Kg
15 inch
T1-5/8-11 x 0.9 inch
(23mm)
T2-5/8-11 x 1.1 inch
(28mm)
15 inch
381 mm
3.0 Inch
76.2 mm
1/2" NPT.
52RAK Safety Lockout Lever Alum Side

4000-
8000
R.P.M.

(8000RPM is standard)

2.0 H.P
1500 W
8.0 Lb/
.3.6 Kg
15 inch
T1-5/8-11 x 0.9 inch
(23mm)
T2-5/8-11 x 1.1 inch
(28mm)
15 inch
381 mm
3.0 Inch
76.2 mm
1/2" NPT.

 

Extra Charge Accessories
? Depressed Center Wheel Kit

? Sanding Pads

Please view the Henrytools Parts Print for your particular model for various mounting accessories to equip your tool for complete safety and convenience.

 

©2015 Henrytools, Inc. • 498 So. Belvoir Blvd., South Euclid, Ohio 44121
Henrytools - Phone: (216) 291-1011 •FAX: (216) 291-5949
Toll Free - Phone: (800) 826-5257 • FAX: (800) 303-2800

Email: daviidh@msn.com