Extended Length Die Grinders

 

40AGH Series Extended Length Die Grinders

(9"-17") Front-end Extended Length Die Grinder

40AGHLS Die Grinder with burr pic

Model 40AGHLSK the world standard steel cased extended length die grinder with safety lock lever throttle.

 

40AGHLS Die Grinder with Guard pic

Model 40AGHLSK extended die grinder with steel case and 4" wheel guard.

40AGHL Series features:

  • An American world standard industrial type extended die grinder.
  • The 40AGHL Series extended grinders feature heavy-duty double row front bearings providing maximum spindle support.
  • Small diameter housing fits comfortably in the palm of your hand.
  • Extended housing allows two-hand operation.
  • Hardened steel motor parts for extended tool life.
  • Unitized motor provides easy maintenance.
  • Collet chuck and spindle models accommodate various mounted accessories.
  • Adjustable direction airflow side exhaust.
  • Available in either an aluminum or rugged steel case.
  • Choice of lever or safety lockout lever throttle.

 

40AGH Series Extended Die Grinders Specifications
Model Lever
Type
Case Material Weight Speed Spindle Type Length Diameter
Front Housing
Motor Dia. Rated Power
40AGHL Standard
Lever
Alum 2.8 Lb.
(1.3 Kg)
18000-
22000
R.P.M.
3/8-24 X 1.0
Inch
13.1 Inch
(334mm)
1.50 Inch
(38.1 mm)
1.6 Inch
(41 mm)
0.9 H.P
.675 W
40AGHS Standard
Lever
Steel 4.1 Lb.
(1.9 Kg)
18000-
22000
R.P.M.
3/8-24 X 1.0
Inch
13.1 Inch
(334mm)
1.50 Inch
(38.1 mm)
1.6 Inch
(41 mm)
0.9 H.P
.675 W
40AGHK Safety Lock Lever Alum 2.8 Lb.
(1.3 Kg)
18000-
22000
R.P.M.
3/8-24 X 1.0
Inch
13.1 Inch
(334mm)
1.50 Inch
(38.1 mm)
1.6 Inch
(41 mm)
0.9 H.P
.675 W
40AGHSK Safety Lock Lever Steel 4.1 Lb.
(1.9 Kg)
18000-
22000
R.P.M.
3/8-24 X 1.0
Inch
13.1 Inch
(334mm)
1.50 Inch
(38.1 mm)
1.6 Inch
(41 mm)
0.9 H.P
.675 W

 

Guards: 4" (501-4A)
Collets: HT-1010 (1/4" collet)
Collets: Ht-1010-3/8" (3/8" collet)

Guards: 4" (501-4A)
Collets: HT-1010 (1/4" collet)
Collets: Ht-1010-3/8" (3/8" collet)

 

 

40EHL Series Extended Length 12.7" Grinder

40EHLS Die Grinder with burr pic

Model 40EHLS steel case extended die grinder with narrow front-end for grinding in confined areas. Total length of this extended tool is approx 12.7 inches.

Super extended 40EH models are featured further down on this webpage.

40EHLS Die Grinder features:

  • The Henrytools 40EH Series extended length die grinder features a super- narrow front end for grinding in previously inaccessible areas.
  • The 40EHL Series extended grinders small diameter housing fits in the palm of your hand.
  • Extended housing allows two-hand operation.
  • Hardened steel motor parts for extended tool life.
  • Unitized motor provides easy maintenance.
  • Erickson collet chuck can accommodate various mounted accessories.
  • Adjustable airflow direction side exhaust.
  • Choice of lever or safety lockout lever throttle.


Capacity:

Burrs/Mounted Stones of shank size 1/8 inch,
1/4 inch, 5/16 inch, 3/8 inch

*Tool is not designed for type 1 or 27 grinding wheels.

40EHL Series 12.7" Extended Grinder Specification Chart
Model Lever
Type
Case
Material
Weight Speed Spindle
Type
Length Dia.
Front
Housing
Motor
Dia.
Rated
Power
40EHLS Standard
Lever
Steel 3.5 lb
(1.6 kg)
15000-22000RPM Erickson
Collet
12.7 inch
(232_mm)
.88 Inch
22.4mm
1.62 inch
41 mm
0.9 H.P
.675 W
40EHLSK Safety Lock Lever Steel 3.5 Lb
(1.6 kg)
15000-22000RPM Erickson
Collet
12.7 inch
(232 mm)
.88 Inch
22.4mm
1.62 inch
41 mm
0.9 H.P
.675 W

Tool Ships standard with a 1/4" Collet insert.

Other sizes can be purchased: 1/8 inch, 1/4 inch, 5/16 inch, 3/8 inch collet inserts.

 

Tool Ships standard with a 1/4" Collet insert.

Other sizes can be purchased: 1/8 inch, 1/4 inch, 5/16 inch, 3/8 inch

 

39GH Series Extended Die Grinders

(17" Length Approx. Length Die Grinders)

3917GH Die Grinder pic

Model 3917GHLS exended length grinder with 5/8" Spindle. This tool features a very narrow front end extension.

 

3917GH Die Grinder with Cone wheel pic

Model 3917GHLS Steel extended grinder shown with cone type wheel attached.

3917GH Die Grinder with collet pic

Model 3917GHLS Steel extended grinder shown with Erickson collet type spindle.

39GH Series Extended Die Grinder features:

  • The Henrytools 3917 Series extended length die grinder features a 17" extended length front end.
  • Extended housing allows two-hand operation.
  • Hardened steel motor parts for extended tool life.
  • Unitized motor provides easy maintenance.
  • Adjustable airflow direction side exhaust.
  • Choice of lever or safety lockout lever throttle.
    A narrow front for grinding in confined areas.
  • Featuring a 17" extended reach front end.
  • Quick change spindle design easily adapts tool to collet, 3/8-24, 1/2-13, or 5/8-11 spindle type.
  • Internal isolated sub-spindle and air motor design reduces vibration.
  • Slim extended length front-end reaches remote areas.
  • Grinder showing a standard 3/8-24 spindle for use with cut-off wheels. Easily adapts tool to collet, 3/8-24, 1/2-13, or 5/8-11 spindle type.
Model Lever
Type
Case Material Weight Speed Spindle Type Dia. Front Housing Length Working Air Consumption Motor Dia. Rated Power
39GH Series Extended Grinders Specifications
3917GHLS Regular Lever Steel 4 lbs.,
1.82kg
15000
18,000
20,000
22,000
RPM
Choice of 3/8-24, 1/2-13, 5/8-11 x 1.000" (2.5cm) Long or 1/8", 1/4", 5/16", 3/8" collet. 1.120"
2.5cm
17"
(431mm)
25cfm
11.8 L/S
1.625"
2.5cm
0.9 H.P
.675 W

** Add a "C" to end of model number for a collet. (1/4" collet insert is standard).
*** Add a "Z" to end of model number for a 5/8-11 spindle.
**** Add a "I" to end of model number for a 3/8-24 spindle.
***** Add a "T" to end of model number for a 1/2-13 spindle.

  • Slim extended length front-end reaches remote areas.
  • Grinder showing a standard 3/8-24 spindle for use with cut-off wheels. Easily adapts tool to collet, 3/8-24, 1/2-13, or 5/8-11 spindle type.

 

Standard Equipment:
Choice of spindle type or collet, wrenches, screen bushing, manual

Capacity:
Burrs/Mounted Stones of shank size 1/4 Inch, 3/8 Inch (with appropriate collet). Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 3/8-24 Mounting, 5/8-11 Mounting or 1/2-13 Mounting. (Depending on the Spindle type purchased).

 

 

SUPER-EXTENDED LENGTH DIE GRINDERS (0.9 H.P.)

 

40AGH+6" Super-extended 19" length grinder

40AGHLS+6 Die Grinder with guard pic

Model 40AGHLS+6 Extended length die grinder featuring "double row" front bearings for superior spindle support. Specify when ordering: choice of collet or wheel guard.
Collet chuck and spindle models accommodate various mounted accessories.

40AGHLS+6 Die Grinder with collet pic

Model 40AGHLS+6 Extended Length die grinder shown with HT-1010 collet for use with carbide burrs.

40AGHL+6" Super Extended Length Grinder features:

  • An American world standard industrial type super-extended die grinder.
  • The 40AGHL+6" Series extended grinders feature heavy-duty double row front bearings providing maximum spindle support.
  • Small diameter housing fits comfortably in the palm of your hand.
  • Extended housing allows two-hand operation.
  • Hardened steel motor parts for extended tool life.
  • Unitized motor provides easy maintenance.
  • Collet chuck and spindle models accommodate various mounted accessories.
  • Adjustable direction airflow side exhaust.
  • Available in either an aluminum or rugged steel case.
  • Choice of lever or safety lockout lever throttle.

 

Capacity:


4 Inch (100mm) Type 1 Wheels Burrs/Mounted Stones of shank size 1/4 Inch, 3/8 Inch (with appropriate collet). Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 3/8-24 Mounting Inlet Size: 1/4"
Hose Size Recommended: 3/8" (10 mm)

Working Air Consumption: 25 CFM

Model Lever
Type
Case Material Weight Speed Spindle Type Length Diameter
Front Housing
Motor Dia. Rated Power
40GH+6" Super-Extended 19" Die Grinder Specifications
40AGHLS+6 Standard Lever Steel 5.8 Lb.
(2.6 Kg)
15000-
22000
R.P.M.
3/8-24 X 1.0
Inch
19.1 Inch
(486 mm)
1.50 Inch
(38.1 mm)
1.6 Inch
(41 mm)
0.9 H.P
.675 W
40AGHLSK+6 Safety Lock Lever Steel 5.8 Lb.
(2.6 Kg)
15000-
22000
R.P.M.
3/8-24 X 1.0
Inch
19.1 Inch
(486 mm)
1.50 Inch
(38.1 mm)
1.6 Inch
(41 mm)
0.9 H.P
.675 W

Upon ordering the customer must specify the accessory needed for his particular tool.

Guards: 4" (501-4A)
Collets: HT-1010 (1/4" collet)
Collets: Ht-1010-3/8" (3/8" collet)

 

Guards: 4" (501-4A)
Collets: HT-1010 (1/4" collet)
Collets: Ht-1010-3/8" (3/8" collet)

Upon ordering the customer must specify the accessory needed for his particular tool.

 

 

40EHL+6 Extended Length 18.7" Grinder

40EH+6 Extended die grinder with flap wheel pic

Model 40EHL+6" Extended Length die grinder shown with safety lockout lever throttle and flap wheel.

40EHL+6 Extended Length die grinder features:

  • Super-extended die grinder 18.7" in Length.
  • Features a longer super- narrow front end for grinding in previously inacessible areas.
  • The 40EHL+6" Series extended grinders small diameter housing fits in the palm of your hand.
  • Extended housing allows comfortable two-handed operation.
  • Hardened steel motor parts for extended tool life.
  • Unitized motor provides easy maintenance.
  • Erickson collet chuck can accommodate various mounted accessories.
  • Adjustable airflow direction side exhaust.
  • Choice of standard lever or safety lockout lever throttle.Tool
  • Ships standard with a 1/4" Collet insert.

    Other sized collet inserts can be purchased: 1/8 inch, 1/4 inch, 5/16 inch, 3/8 inch.

40EHL Series 18.7" Extended Grinder Specification Chart
Model Lever
Type
Case
Material
Weight Speed Spindle
Type
Length Dia.
Front
Housing
Motor
Dia.
Rated
Power
40EH+6" Standard
Lever
Steel 5.8 lb
2.6 kg.
15000-22000RPM Erickson
Collet
Longer
18.7 inch
(475 mm)
.88 Inch
22.4mm
1.62 inch
41 mm
0.9 H.P
.675 W
40EHK+6" Safety Lock Lever Steel 5.8 lb
2.6 kg.
15000-22000RPM Erickson
Collet
Longer
18.7 inch
(475 mm)
.88 Inch
22.4mm
1.62 inch
41 mm
0.9 H.P
.675 W

 

 

 

 

 

 

39GH Series Super Extended Die Grinders

(17"-27" Length Die Grinders)

3927GHLS Extended die grinder pic

Model 3927GHLSK featuring a staggering 27" overall length. Multiple spindle types can be ordered for this extended length grinder. (see specifications chart) (shown with safety lockout lever throttle)

3917GHL Die Grinder pic

Model 3917GHLSK featuring a 17" overall length. Multiple spindle types can be had for this extended length grinder. (shown with safety lockout lever throttle) (5/8-11 spindle shown with cone wheel)

Model 3922GHLS Extended Die Grinder pic

Model 3922GHLSK featuring a 22" overall length. Multiple spindle types can be had for this extended length grinder.

  • The Henrytools 39GH Serie super-extended length grinder are available in a 17", 22" or 27" length version.
  • Quick change spindle design easily adapts tool to collet, 3/8-24, 1/2-13, or 5/8-11 spindle type.
  • Internal isolated sub-spindle and air motor design reduces vibration.
  • Slim extended length front-end reaches remote areas.
  • Adjustable airflow side exhaust.
  • Choice of lever or lockout lever throttle.

 

 

39GH Series Super Extended Grinders (22"-27" Length) Specifications
Model Lever
Type
Case
Material
Weight Speed Spindle
Type
Length Diameter
Front
Housing
Motor
Dia
Rated
Power
3917_GHLS Standard
Lever
Steel 4 lbs.,
1.82kg
15,000
18,000
20,000
22,000
RPM
See Note

17"
431mm

1.120"
2.5cm
1.625"
2.5cm
0.9 H.P
.675 W
3922_GHLS Standard
Lever
Steel 4.5 lbs.,
2.05kg
15,000
18,000
20,000
22,000
RPM
See Note: 22"
558mm
1.120"
2.5cm
1.625"
2.5cm
0.9 H.P
.675 W
3922_GHLS Safety Lockout
Lever
Steel 4.5 lbs.,
2.05kg
15,000
18,000
20,000
22,000
RPM
See Note: 22"
558mm
1.120"
2.5cm
1.625"
2.5cm
0.9 H.P
.675 W
3927_GHLS Standard
Lever
Steel 5 lbs.,
2.27kg
15,000
18,000
20,000
22,000
RPM
See Note: 27"
685mm
1.120"
2.5cm
1.625"
2.5cm
0.9 H.P
.675 W
3927_GHLSK Safety Lockout
Lever
Steel 5 lbs.,
2.27kg
15,000
18,000
20,000
22,000
RPM
See Note: 27"
685mm
1.120"
2.5cm
1.625"
2.5cm
0.9 H.P
.675 W

 

Spindle Choice: of 3/8-24, 1/2-13, 5/8-11 x 1.000" (2.5cm) Long or 1/8", 1/4", 5/16", 3/8" collet.

** Add a "C" to end of model number for a collet. (1/4" collet insert is standard).
*** Add a "Z" to end of model number for a 5/8-11 spindle.
**** Add a "I" to end of model number for a 3/8-24 spindle.
***** Add a "T" to end of model number for a 1/2-13 spindle.

Standard Equipment:
Choice of spindle type or collet, wrenches, screen bushing, manual.
Capacity:
Burrs/Mounted Stones of shank size 1/4 Inch, 3/8 Inch (with appropriate collet). Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 3/8-24 Mounting, 5/8-11 Mounting or 1/2-13 Mounting. (Depending on the Spindle type purchased).

*Tool is not designed for type 1 or 27 grinding wheels. Please view the other Henrytool grinders designed for regular Type 1 grinding wheel applications.

39GH Super Extended Grinders (22"-27" Length) Specifications
Working Air Consumption
25cfm
11.8 L/S

 

 

©2015 Henrytools, Inc. • 498 So. Belvoir Blvd., South Euclid, Ohio 44121
Henrytools - Phone: (216) 291-1011 •FAX: (216) 291-5949
Toll Free - Phone: (800) 826-5257 • FAX: (800) 303-2800

Email: daviidh@msn.com