Chipping Hammers

 

 

NA-16 SERIES LIGHT DUTY CHIPPING HAMMERS

NA-16 Light Duty chipping hammer pic

NA-16 light-duty pneumatic chipping hammer featuring a FRONT exhaust. Available with either a hex or round tool nose.

 

NA-16P Pistol Type Chipping hammer pic

NA-16PX Pistol Type pneumatic chipping hammer featuring a FRONT exhaust. Available with either a hex or round tool nose. (See chart)

NA-16PX Pistol Type pneumatic chipping hammer featuring a FRONT exhaust. (reverse angle view).

NA-16 Series chipping hammer features:

  • Featuring a FRONT exhaust.
  • Hard-hitting action for fast chipping and peening.
  • (5200 blows per minute)
  • Heavy-duty spring type chisel retainer.
  • Available with either a hex or round tool nose.
  • (Spring/Beehive Chisel Retainer)

Air Inlet Size: 1/4" NPT
Hose Size Recommended: 3/8" (10 mm)
Recommended air pressure 90 PSI

Chisel types: Hexagon or Round shank.

See chisel chart in Accessory section below for chisel types.

N16 Chippin hammer in action pic

 

NA-16 Series Chipping Hammer (Front Exhaust)
Model Thrtl Type Exh.
Direction
BPM Tool Nose Bore and Stroke Overall Length Weight Body Dia Working Air Consumption
NA-16X Standard Lever FRONT Exhaust 5200 0.371 Hex .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3.5 Lb.
(1.6 Kg)
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)
NA-16R Standard Lever FRONT Exhaust 5200 0.401 Round .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3.5 Lb.
(1.6 Kg)
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)
NA-16PX

Pistol Handle

FRONT Exhaust 5200 0.371 Hex .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3.5 Lb.
(1.6 Kg)
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)
NA-16PR Pistol Handle FRONT Exhaust 5200 0.401 Round .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3.5 Lb.
(1.6 Kg)
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)

 

Chipping Hammer Chisels
Part Number Cutting Edge Width Description Overall Length Shank Type
595001
1/2"
Narrow chisel
7"
Hex shank picHex Shank
595003
1/2"
Narrow chisel 12" Hex shank picHex Shank
595004
1/2"
Narrow chisel 18" Hex shank picHex Shank
596009
1/2"
Narrow chisel 7" Round Shank picRound Shank
596010
1/2"
Narrow chisel

12"

Round Shank picRound Shank
596011
1/2"
Narrow chisel 18"
Round Shank picRound Shank

 

 

 

N-16 Chipping Hammer Series

N-16 chipping Hammer pic

N-16 light-duty chipping hammer chipping hammer with "SIDE"exhaust.

N16 Chippin hammer in action pic

N-16 Chipping Hammer features:

  • Featuring a "SIDE" exhaust.
  • Hard-hitting action for fast chipping and peening.
  • (5200 blows per minute)
  • Heavy-duty spring type chisel retainer.
  • Available with either a hex or round tool nose.
  • (Spring/Beehive Chisel Retainer)

Air Inlet Size: 1/4" NPT
Hose Size Recommended: 3/8" (10 mm)
Recommended air pressure 90 PSI

Chisel types: Hexagon or Round shank.

See chisel chart in Accessory section below for chisel types.

 

N-16 Series Chipping Hammer (Side Exhaust)
Model Throttle Type Exhaust Direction Blows per Minute Tool Nose Bore and Stroke Overall Length Weight Body Diameter Working Air Consumption
N-16X Standard Lever SIDE Exhaust 5200 0.371 Hex .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3 lbs., 3 oz.
1.5 kg
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)
N-16R Standard Lever SIDE Exhaust 5200 0.401 Round .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3 lbs., 3 oz.
1.5 kg
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)

 

Chipping Hammer Chisels
Part Number Cutting Edge Width Description Overall Length Shank Type
595001
1/2"
Narrow chisel
7"
Hex shank picHex Shank
595003
1/2"
Narrow chisel 12" Hex shank picHex Shank
595004
1/2"
Narrow chisel 18" Hex shank picHex Shank
596009
1/2"
Narrow chisel 7" Round Shank picRound Shank
596010
1/2"
Narrow chisel

12"

Round Shank picRound Shank
596011
1/2"
Narrow chisel 18"
Round Shank picRound Shank

 

 

HT-4B20 with 2" stroke 4-Bolt Heavy Duty Chipping Hammers

HT-4B20 Chipping Hammer pic

Model HT-4B20 4-bolt chipping hammer features a hard hitting 2" stroke.

 

HT-4B20 Chipping hammer in action pic

HT-4B20 Chipping Hammer features:

  • Henrytools 4-Bolt chipping hammer series with a 2" stroke.
  • Ergonomically designed 4-bolt chipping hammer handle helps keep the operators hand-in-line with the chisel for maximum operator comfort.
  • A forged steel or lightweight aluminum handle is available for the ultimate in versatility.
  • Steel 4-bolt flange for increased durability and strength, plus ease of serviceability.4-Bolt design provides ease of maintenance. Choice of round tool nose for .680" round shank chisels or hex tool nose for .580" hexagon shank chisels.
  • Four bolt design eliminates handle breakage.
  • Includes chisel retainer and chisel retainer spring.
  • (You specify either hex or round tool nose to accommodate your particular chisel type when ordering)

Recommended air pressure 90 PSI. Choice of bushing: Round-chisel freely rotates, Hex prevents chisel rotation. This hammer is a four bolt design which reduces handle breakage and offers extra strength and better grip.  This unit measures just under 16" long and weighs in at 19 lbs.  Ideal for chipping on a wall, overhead, or in confined areas.  The air chipper is available with a point or narrow chisel.

PLEASE NOTE WHEN ORDERING:
* For a tool with an aluminum handle, add an "A" to end of model number.
* For a tool with a hex tool nose, add an "X" to end of model number
* For a tool with a round tool nose, add an "R" to end of model number.

HT-4B20 with 2" stroke 4-Bolt Heavy Duty Chipping Hammers
Model Blows per Minute Bore and Stroke Overall Length Weight w/Steel Handle Weight w/Alum Handle Air Inlet Working Air Consumption
HT-4B20 2400 1.125" x 2", 28.5mm x 50.8mm 14"
356mm
13.5 lbs
6.1 kg
9.5 lbs 3/8" N.P.T. 26 CFM

PLEASE NOTE WHEN ORDERING:
* For a tool with an aluminum handle, add an "A" to end of model number.
* For a tool with a hex tool nose, add an "X" to end of model number
* For a tool with a round tool nose, add an "R" to end of model number.

 

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR

 

Chipping Hammer Retainers
Part Number Size Fits Tool Models View
2500-12-525
(6872122)
For Oval Collar Type Chisels HT-4B Series or Sullair Chippers or CP4123 chipping hammer retainer pic

 

Swivel Hose Connector
Part Number Description View
1080 Swivel hose connector for all chipping hammers with 7/8-24 I.D. inlet thread. Use with all HT Series Chipping Hammers. swivel hose connector pic

 

 

 

 

 

HT-4B30 with 3" stroke 4-Bolt Heavy Duty Chipping Hammers

HT-4B30 Chipping Hammer pic

Model HT-4B30 4-bolt chipping hammer features a 3" stroke shown above.

HT-4B20 Chipping hammer in action pic

HT-4B30 Chipping Hammer features

  • Henrytools 4-Bolt chipping hammer with 3" stroke.
  • Ergonomically designed 4-bolt chipping hammer handle helps keep the operators hand-in-line with the chisel for maximum operator comfort.
  • A forged steel or lightweight aluminum handle is available for the ultimate in versatility.
  • Steel 4-bolt flange for increased durability and strength, plus ease of serviceability.
  • 4-Bolt design provides ease of maintenance.
  • Choice of round tool nose for .680" round shank chisels or hex tool nose for .580" hexagon shank chisels.
  • Four bolt design eliminates handle breakage.
  • Includes chisel retainer and chisel retainer spring.
  • (You specify either hex or round tool nose to accommodate your particular chisel type when ordering)

Recommended air pressure 90 PSI. Choice of bushing: Round-chisel freely rotates, Hex prevents chisel rotation. This hammer is a four bolt design which reduces handle breakage and offers extra strength and better grip.  This unit measures just under 16" long and weighs in at 19 lbs.  Ideal for chipping on a wall, overhead, or in confined areas.  The air chipper is available with a point or narrow chisel.

PLEASE NOTE WHEN ORDERING:
* For a tool with an aluminum handle, add an "A" to end of model number.
* For a tool with a hex tool nose, add an "X" to end of model number
* For a tool with a round tool nose, add an "R" to end of model number.

HT-4B30 with 3" stroke 4-Bolt Heavy Duty Chipping Hammers
Model Blows per Minute Bore and Stroke Overall Length Weight w/Steel Handle Weight w/Alum Handle Air Inlet Working Air Consumption
HT-4B30 1920 1.125" x 3", 28.5mm x 76.2 mm 16" 406mm 14.5 lbs
6.5 kg
10.5 lbs 3/8" 30 CFM

PLEASE NOTE WHEN ORDERING:
* For a tool with an aluminum handle, add an "A" to end of model number.
* For a tool with a hex tool nose, add an "X" to end of model number
* For a tool with a round tool nose, add an "R" to end of model number.

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR

 

Chipping Hammer Retainers
Part Number Size Fits Tool Models View
2500-12-525
(6872122)
For Oval Collar Type Chisels HT-4B Series or Sullair Chippers or CP4123 chipping hammer retainer pic

 

Swivel Hose Connector
Part Number Description View
1080 Swivel hose connector for all chipping hammers with 7/8-24 I.D. inlet thread. Use with all HT Series Chipping Hammers. swivel hose connector pic

 

 

 

 

 

HT-4B40 with 4" stroke 4-Bolt Heavy Duty Chipping Hammers

HT-4B30 Chipping Hammer pic

Model HT-4B40 4-bolt chipping hammer shown with 4" stroke shown above.

HT-4B20 Chipping hammer in action pic

HT-4B40 Chipping Hammer features

  • Henrytools 4-Bolt chipping hammer with a 4" stroke.
  • Ergonomically designed 4-bolt chipping hammer handle helps keep the operators hand-in-line with the chisel for maximum operator comfort.
  • A forged steel or lightweight aluminum handle is available for the ultimate in versatility.
  • Steel 4-bolt flange for increased durability and strength, plus ease of serviceability.4-Bolt design provides ease of maintenance. Choice of round tool nose for .680" round shank chisels or hex tool nose for .580" hexagon shank chisels.
  • Four bolt design eliminates handle breakage.
  • Includes chisel retainer and chisel retainer spring.
  • (You specify either hex or round tool nose to accommodate your particular chisel type when ordering)

Recommended air pressure 90 PSI. Choice of bushing: Round-chisel freely rotates, Hex prevents chisel rotation. This hammer is a four bolt design which reduces handle breakage and offers extra strength and better grip.  This unit measures just under 16" long and weighs in at 19 lbs.  Ideal for chipping on a wall, overhead, or in confined areas.  The air chipper is available with a point or narrow chisel.

PLEASE NOTE WHEN ORDERING:
* For a tool with an aluminum handle, add an "A" to end of model number.
* For a tool with a hex tool nose, add an "X" to end of model number
* For a tool with a round tool nose, add an "R" to end of model number.

HT-4B40 with 4" stroke 4-Bolt Heavy Duty Chipping Hammers
Model Blows per minute Bore and Stroke Overall Length Weight w/Steel Handle Weight w/Alum Handle Air Inlet Working Air Consumption
HT-4B40 1500 1.125" x 4", 28.5mm x 101.6mm 16" 406mm 15.5 lbs
7.0 kg
11.5 lbs 3/8" 33 CFM

PLEASE NOTE WHEN ORDERING:
* For a tool with an aluminum handle, add an "A" to end of model number.
* For a tool with a hex tool nose, add an "X" to end of model number
* For a tool with a round tool nose, add an "R" to end of model number.

 

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR

 

 

Chipping Hammer Retainers
Part Number Size Fits Tool Models View
2500-12-525
(6872122)
For Oval Collar Type Chisels HT-4B Series or Sullair Chippers or CP4123 chipping hammer retainer pic

 

 

Swivel Hose Connector
Part Number Description View
1080 Swivel hose connector for all chipping hammers with 7/8-24 I.D. inlet thread. Use with all HT Series Chipping Hammers. swivel hose connector pic

 

 

 

 

HT Series Traditional Style Chipping Hammers

 

HT-20 HenryTools 2 " stroke chipping hammer

HT-20X Chipping Hammer pic

Model HT-20 chipping hammer featuring a 2" stroke.

HT-20 chipping hammer with chisel pic

Model HT-20 chipping hammer featuring a 2" stroke. (shown with chisel) (see chart)

HT-20 chipping hammer features:

  • This is the original style Henrytools classic series chipping hammer.
  • 100% compatible with the Chicago Pneumatic CP4123 series chipping hammers.
  • Featuring a 2" stroke.
  • Rugged forged Steel handle.
  • Simplate valve assembly provides fine control of throttle and trouble free operation.
  • Choice of round tool nose for .680" round shank chisels(.680" Round chisel rotates freely) or hex tool nose(.580" Hexagon chisel prevents chisel rotation).
  • Increased power and efficiency on work surfaces.
  • Teasing throttle for precise control. Pistol grip handle with self closing outside trigger.
HT-20 HenryTool chipping hammer compatible with Chicago Pneumatic 4123
Model Blows per Minute Bore and Stroke Overall Length Net Weight Air Inlet Working Air Consumption
HT-20 2400 1 1/8" x 2", 28.5mm x 50.8mm 14"
356mm
13.5 lbs
6.1 kg
3/8" N.P.T. 25 cfm

 

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR

 

 

HT-30 HenryTools 3 " stroke chipping hammer

HT-30 chipping hammer with chisel pic

Model HT-30 chipping hammer with a 3" stroke.

HT-30 chipping hammer features:

  • A classic Henrytools chipping hammer. 100% compatible with the Chicago Pneumatic CP4123 series chipping hammers.
  • Featuring a 3" stroke.
  • Rugged forged Steel handle.
  • Simplate valve assembly provides fine control of throttle and trouble free operation.
  • Choice of round tool nose for .680" round shank chisels(.680" Round chisel rotates freely) or hex tool nose (.580" Hexagon chisel prevents chisel rotation).
  • Increased power and efficiency on work surfaces.
  • Teasing throttle for precise control. Pistol grip handle with self closing outside trigger.
HT-30 Henrytool chipping hammer compatible with Chicago Pneumatic 4123
Model Blows per Minute Bore and Stroke Overall Length Net Weight Air Inlet Working Air Consumption
HT-30 1920 1 1/8" x 3", 28.5mm x 76.2 mm 16" 406mm 14.5 lbs
6.5 kg
3/8" N.P.T. 26 cfm

 

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR

 

 

 

HT-40 HenryTools 4 " stroke chipping hammer

HT-40 chipping hammer with chisel pic

Model HT-40 chipping hammer freatures a 4" Stroke.

HT-40 Chipping Hammer features:

  • A classic Henrytools chipping hammer.
  • 100% compatible with the CP4123 series chipping hammers.
  • Featuring a 4" stroke.
  • Rugged forged Steel handle.
  • Simplate valve assembly provides fine control of throttle and trouble free operation.
  • Choice of round tool nose for .680" round shank chisels(.680" Round chisel rotates freely) or hex tool nose(.580" Hexagon chisel prevents chisel rotation).
  • Increased power and efficiency on work surfaces.
  • Teasing throttle for precise control.
  • Pistol grip handle with self closing outside trigger.
HT-40 Henrytool chipping hammer compatible with Chicago Pneumatic 4123
Model Blows per Minute Bore and Stroke Overall Length Net Weight Air Inlet Working Air Consumption
HT-40 1500 1 1/8" x 4", 28.5mm x 101.6mm 17"
432mm
15.5 lbs
7.0 kg
3/8" N.P.T. 27 cfm

 

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR

 

 

 

©2015 Henrytools, Inc. • 498 So. Belvoir Blvd., South Euclid, Ohio 44121
Henrytools - Phone: (216) 291-1011 •FAX: (216) 291-5949
Toll Free - Phone: (800) 826-5257 • FAX: (800) 303-2800

Email: daviidh@msn.com